Code Switch Setting
14
En
g
lish
De
ut
sc
h
Fr
a
n
ç
a
is
Da
ns
k
Es
pa
ñ
o
l
Itali
a
no
Sv
en
ska
Ned
e
rlan
d
s
Make sure the house code settings match
For all of your secondary remote controls to work, the
house code in each must match the one in your primary
remote.
The first four switches define the house code and estab-
lish which media center the remote can control.
Figure 3
Nine switches
inside the battery
compartment
At the factory, all RC-18S remotes are set with the same
house code as your LIFESTYLE
®
system. Usually, you do
not need to change these first four switches.
However, in the case of a house code conflict with
another nearby LIFESTYLE
®
system, you can change the
house code in the primary remote to resolve the conflict.
If you ever use this option, the changed house code must
be applied to any expansion remote
controls used with this system, too.
At the factory, each RC-18S remote has its remaining
switches set:
• To receive audio stream 2 (switch 5)
• To be used in Room B (switches 6-9)
To check the settings in your new remote, remove the
battery cover to see the small switches just above the
batteries.
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9
House code switches
