Bose BLUETOOTH HEADSET, Owner'S Manual

Page: 10 / 200

6
English
Tab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14
Note: If the Bose
®
headset does not appear in the list, press and
hold the Call button on the headset until the Bluetooth
®
light blinks
(in about 5 seconds). This makes the headset manually discoverable
so it shows up in the list for selection.
4. If your mobile phone asks for a passkey, enter digits 0000
and press OK. Some phones ask you to accept connection,
as well.
As the two devices connect, the Bluetooth indicator on the
headset flashes, then turns solid blue to indicate a successful
connection. This light turns off in 30 seconds when paring is done
for the first time.
To pair an additional phone (up to a total of 6):
With the mobile phone and your headset turned on, press and hold
the headset call button to make the headset discoverable again.
Then follow steps 2 – 4 beginning on page 5.
Deleting a no-longer-used phone
To make sure the headset no longer connects to an old mobile
phone, you can clear the headset memory and then re-pair it to
the phones you want.
To clear the headset pairing memory:
Simultaneously press the Call and Volume – buttons for 10
seconds. The headset reverts to discoverable mode, allowing you
to re-pair the mobile phone you want connected.
VincentOG.book Page 6 Wednesday, November 3, 2010 9:57 AM