Bose BLUETOOTH HEADSET, Owner'S Manual

Page: 16 / 200

12
English
Tab 6, 12 Tab 5, 11 Tab 4, 10, 16 Tab 3, 9, 15 Tab 2, 8, 14
Reject an incoming call by briefly pressing and holding the
Call button.
Put an active call on hold and answer the other phone by
pressing the Call button. This feature is known as Call Waiting.
Switch between two calls by pressing the Call button twice.
You can also hold conference calls, if your phone service provides
this feature.
Begin conferencing while two or more callers are on the line by
pressing and holding the Call button for 3 seconds.
Using the multi-point feature
Multi-point enables your Bose
®
Bluetooth
®
headset to maintain an
active connection with two mobile phones. So the headset is
ready when you make or take calls on both a personal and a work
phone, for example.
Pairing a phone for use with multi-point
Before proceeding, be sure to disable Bluetooth on any phones
already paired to the headset.
1. Turn on both the headset and the phone.
2. Press and hold both the and Call buttons for
5 seconds to enable multi-point and make the headset
discoverable.
3. Complete the pairing procedure specific to this phone.
4. Turn the headset off and then on again to allow the headset
to connect to the two phones you want to use.
VincentOG.book Page 12 Wednesday, November 3, 2010 9:57 AM