Boschetti Industrie Meccaniche srl
13
IT
Ver. 01/2018
Instructions for use
General warnings
Both for the maintenance and the reparation charge qualified and authorized technicians. The installation as well as
possible transformations into another gas type, maintenance and reparations must be carried out according to the
directions in force and only by a qualified and authorized staff. Otherwise the warranty and the responsability of the
constructor are no longer valid.
The device must be checked at least once a year by a qualified staff. About this a maintenance contract as advisable.
The water heater is thought to heat drinking and sanitary water, any different use is not allowed.
Children must be kept away from gas devices.
Before turning on the device read carefully all the directions reported on this manual.
Do not let the device come into contact with inflammable material.
Water tank filling
Before carrying out this operation, it is recommended to carry out the hydraulic connection in according to the
instructions at the specific paragraph on page 7.
The water tank filling must be carried out as follows:
- open the cold water tap (pic. 11 - pos. B);
- open the warm water tap (pic. 11 - pos. A).
It is advisable to open a warm water tap of the domestic plant so that the air in the pipe evacuates. The necessary time
for tank filling depends on the device‘s rated capacity.
Picture 11
A - Warm water connection
B - Cold water connection
C - Discharge
D - Control panel
E - Recirculation
A
B
C
D
E
