background image

en

    Cleaning and maintenance

34

Floor drain:

Caution!

Risk of material damage due to 

leaks or draining water.

Secure the drain hose to prevent it 

from slipping out. Do not kink or 

bend the drain hose. The height 

difference between the surface on 

which the appliance is installed and 

the drain hose must be no more than 

100 cm.

Caution!

Risk of accumulated water being 

drawn back into the appliance and 

causing material damage.

Check that the water drains away 

quickly. The drain must not be 

sealed or blocked.

The condensation water is now 

discharged via the drain hose into the 

waste-water system or into a washbasin.

Note:  

If you want to drain the 

condensation water back into the 

condensation container, reverse these 

steps.

Caution!

Risk of material damage/damage to the 

appliance

If you are draining condensation water 

into the condensation container, liquid 

may leak out of the socket and cause 

material damage. Before operating the 

appliance, make sure that the 

condensation hose is secured to the 

socket.

D

Cleaning and 

maintenance

Cleaning and maintenance

Cleaning the appliance

:

Warning

Risk of death!

The appliance is powered by electricity. 

There is a risk of electric shock if you 

come into contact with live components. 

Therefore please note:

Switch off the appliance. Disconnect 

the appliance from the power supply 

(pull out the plug).

Never take hold of the mains plug 

with wet hands.

When removing the mains plug from 

the socket, always take hold of the 

plug itself and never the mains 

cable, otherwise this may damage 

the mains cable.

Do not make any technical 

modifications to the appliance or its 

features.

Repairs and any other work on the 

appliance must only be conducted 

by our customer service or by an 

electrician. The same applies for 

replacing the mains cable (when 

necessary).

Spare mains cables can be ordered 

from our customer service.

:

Warning

Risk of poisoning!

Poisonous fumes may be given off by 

cleaning agents that contain solvents, 

e.g. cleaning solvent.

Do not use cleaning agents that contain 

solvents.

Summary of Contents for WTR85T00BY













































Reviews: