en
Draining the condensation water
32
Adjust the appliance setting as
follows:
1.
Set the programme to position 2.
The current setting will appear on the
display.
2.
Press
Drying Time
5
or
Finished
in
ñ
until the required setting
appears on the display.
Settings:
3.
Alter any additional appliance
settings you require or save and exit
the appliance settings.
Saving and exiting the appliance
settings
Save and exit the appliance settings as
follows:
1.
Turn the programme selector to
switch off the appliance.
2.
Wait 5 seconds.
Note:
The selected settings are
retained even after the appliance has
been switched off.
Œ
Draining the
condensation water
Draining the condensation water
Condensation will form in the appliance
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
1.
Remove any accessories from the
drum.
2.
Remove all items from the bag.
600
0
Low
¹
1800
0
High
#
+
3
;
