background image

Laundry

 en

27

11 Laundry

Note: 

You can find further information

in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.

11.1 Preparing the laundry

ATTENTION!

Objects remaining in the laundry may
damage the laundry and the drum.

Remove all items from any pock-
ets in your laundry before using
the appliance.

To protect your appliance and the
laundry, prepare the laundry be-
forehand.
– Empty any pockets
– Brush sand out of all collars and

pockets

– Close bed covers and cushion

covers

– Close all zips, Velcro fasteners,

hooks and eyes

– Tie cloth belts, apron strings,

etc. together or use a laundry
bag.

– Remove curtain hooks and lead

strips or use a mesh laundry
bag

– Use a mesh laundry bag for

small items of laundry, such as
children's socks

– Separate items of laundry and

shake them out, or observe the
programme description

– Spin the laundry before drying

operation

12 Basic operation

operation

Note: 

You can find further information

in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.

12.1 Switching on the appli-

ance

Requirement:

 The appliance has

been correctly installed and connec-
ted. 
→ 

"Installation and connection",

Page 12

Turn the programme selector to a
programme.

12.2 Setting a programme

1.

Turn the programme selector and
set the required programme. 
→ 

"Programmes", Page 24

2.

If required, adjust the programme
settings. 
→ 

"Adjusting the programme set-

tings", Page 27

12.3 Adjusting the pro-

gramme settings

Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.

Requirement:

 A programme is set. 

→ 

"Setting a programme", Page 27

Adjust the programme settings. 
→ 

"Buttons", Page 21

Note: 

The programme settings are

not saved permanently for the pro-
gramme.

Summary of Contents for WTH85VH3

















































Reviews: