Bosch WTG865H4UC, Use And Care Manual / Installation Instructions

Page: 14 / 48

14
9
WARNING
RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS
▯
The supplied Power Adapter is intended to be
used only for powering the Bosch Washers and
Dryers having NEMA 6-15P cords. This Power
Adapter is unique as it allows for both the Dryer
and Washer to plug into the home's existing 4-
prong dryer receptacle. If the home has an
existing 3-prong dryer receptacle it and its
complete branch circuit must be changed to a 4-
prong circuit.
▯
Use only Bosch replacement fuses in the Power
Adapter (Customer Service part number
10013781).
▯
If any parts are missing please notify your dealer
immediately.
Tip:
For correct adapter installation see
~
Electrical
Connections; Page 16
Accessories for your appliance
Drying rack
A drying rack placed inside the dryer for drying wool
items, shoes, etc. is available.
Drying rack item number:
WMZ20600
Pedestal
The dryer can be mounted on a Bosch pedestal, noted
below, for easier loading and unloading (see washing
machine user manual for unique pedestal model number
for the washer).
Pedestal item number:
WMZ20500 or replacement
WTZPW20D
Stacking kits
The dryer can be stacked on a Bosch washer of the
same dimensions to save space. Only the below
Stacking kits must be used when stacking this dryer on a
Bosch washer.
Stacking kit without a shelf:
WTZ20410UC
Stacking kit with a shelf:
WTZ11400UC
Power Adapter
The Power Adapter is for plugging into home's existing 4-
prong receptacle and has two power outlets, one each
for your current Bosch Dryer and Washer to plug into.
Power Adapter item number:
WTZPA20UC
Tip:
Your Bosch dryer comes with the Power Adapter
included in the drum. The accessory number is given
here only if it is lost or damaged and a replacement is
needed.
Accessories can be purchased from Customer Service
or your local dealer.
~
Customer service; Page 4
Installation - step by step and check list
Review the following list and check off each step as it is
completed during installation, if necessary.
1.
Unpack the dryer.
2.
Remove all objects from the dryer drum.
3.
Check the dryer for visible damage.
4.
Position the dryer near the installation location.
5.
Disconnect the power cord and drain hose from their
clips on the back of the dryer.
9
CAUTION
Do not disconnect the drain hose from the sump/
pump connection at the bottom of the dryer.
NOTICE:
Do not reuse an old or different drain hose.
Only use the drain hose included with the dryer.
6.
Connect the outlet end of the drain hose to a
standpipe or other drain inlet. Examples are shown
below.
9
CAUTION
APPLIANCE DAMAGE COULD OCCUR IF DRAIN
WATER FLOWS BACK INTO THE APPLIANCE
In all drain conditions, scenarios, or connections
you must ensure:
▯
The drain water from the hose is free flowing and
not obstructed allowing adequate water flow.
▯
Drain opening must not be sealed in any way. It
must be open to avoided a back siphon
condition.
▯
The end of the drain hose does not protrude into
the pumped out or standing water.
▯
Be sure to follow all local codes and regulations
in draining the condensate water to a suitable
drain.
(QVXUHWKHGUDLQKRVH
UHPDLQVFRQQHFWHG
WRVXPSSXPSRXWOHW