Bosch WORCESTER GREENSTAR WIRING CENTRE, Installation, Commissioning & Servicing Instructions

Page: 7 / 16

INSTALLATION
6 720 804 107 (2012/10) 7
7. Connect cable to plug and ensure it is connected to the right terminals
(

chapter 3.2.3).
Fig. 13 Electrical connection - step 3
ELECTRICAL CONNECTION - STEP 4
1. Put the grommet used in step 3 into the socket.
2. Plug in first connected plug from where it was removed.
3. Plug in second connected plug from where it was removed.
Fig. 14 Electrical connection - step 4
ELECTRICAL CONNECTION - STEP 5
▶ Secure cables connected in steps 1 - 4 with the strain relief supplied
as shown in fig. 15.
Fig. 15 Electrical connection - step 5
ELECTRICAL CONNECTION - STEP 6
1. Route cable through a grommet.
2. Remove plug from the socket.
3. Connect cable to plug and ensure it is connected to the right terminals
(

chapter 3.2.3).
4. Remove plug from the socket.
5. Connect cable to plug and ensure it is connected to the right terminals
(

chapter 3.2.3).
6. Route cable through the same grommet.
7. Remove plug from the socket.
8. Connect cable to plug and ensure it is connected to the right terminals
(

chapter 3.2.3).
Fig. 16 Electrical connection - step 6
ELECTRICAL CONNECTION - STEP 7
▶ Secure cables connected in step 6 with the strain relief supplied as
shown in fig. 17.
Fig. 17 Electrical connection - step 7
2.
5. 5.
7. 7.
6. 6.
3.
≥ 20
1.
4.
6 720 804 106-11.1O
1.
3.
2.
6 720 804 106-12.1O
6 720 804 106-13.1O
3. 3.
1. 1.
4. 4.
6. 6.
8. 8.
7. 7.
≥ 20
5. 5.
2. 2.
6 720 804 106-14.1O
6 720 804 106-15.1O