background image

Safety instructions    

en

9

Do not use the appliance if 

industrial chemicals have 

been used to clean the 

laundry.

:

Warning

Risk of explosions/fire!

Laundry that has been 

pretreated with cleaning 

agents that contain solvents, 

e.g. stain remover/cleaning 

solvent, may cause an 

explosion in the drum.

Rinse the laundry thoroughly 

with water before washing it 

in the machine.

Risk of explosions/fire!

Certain objects may ignite 

when drying is in progress, 

or even cause the appliance 

to catch fire or explode.

Remove any lighters or 

matches from pockets on 

items of clothing.

Risk of explosions/fire!

If there is coal dust or flour in 

the air around the appliance, 

this may cause an explosion.

Make sure that the area 

around the appliance is kept 

clean when it is in operation.

:

Warning

Risk of fire/material damage/

damage to the appliance!

If a program is terminated 

before the drying cycle has 

finished, this prevents the 

laundry from cooling down 

sufficiently and may cause the 

laundry to ignite, or may result 

in material damage or damage 

to the appliance.

During the last part of the 

drying cycle, the laundry in 

the drum is not heated 

(cooling cycle). This is to 

ensure that it remains at a 

temperature at which it will 

not be damaged.

Do not switch off the 

appliance before the drying 

cycle has finished unless you 

remove all items of laundry 

from the drum immediately 

and spread them out (to 

dissipate the heat).

:

Warning

Risk of poisoning!

Poisonous fumes may be given 

off by cleaning agents that 

contain solvents, e.g. cleaning 

solvent.

Do not use cleaning agents that 

contain solvents.

:

Warning

Risk of injury!

If you support your weight/sit 

on the appliance door when 

it is open, the appliance may 

tip over, which may result in 

injury.

Do not support your weight 

on the appliance door when 

it is open.

Risk of injury!

If you climb onto the 

appliance, the worktop may 

break, which may result in 

injury.

Do not climb onto the 

appliance.

Risk of injury!

Summary of Contents for WNA13400ES

























































Reviews: