Bosch WLK24261BY Instruction Manual And Installation Instructions Download Page 33

Page: 33 / 42

Positioning and connecting

Positioning and

connecting

Pos

ion

ing

and

con

nec

Included with the appliance

Note:

Check the washing machine for

transport damage. Never use a

damaged washing machine. If you have

any complaints, contact the dealer from

whom you purchased the appliance or

our after-sales service.

Also required for connection of the

water drainage hose to a siphon:

1 hose clip Ø 24–40 mm (DIY store) is

also required for connection

to a siphon. Connecting the water

Page 36

Useful tools:

■

Spirit level for alignment

Page 37

■

Spanner with:

– size 13: for loosening the

transportation protection devices

Page 34

– size 17: for aligning the appliance

feet

Page 37

Installation

Note:

Moisture in the drum is due to

the final inspection.

Secure installation

Warning

Risk of injury!

■

The washing machine is heavy –

caution: take care when lifting it.

■

If the washing machine is lifted by

protruding components (e.g. the

washing machine door), the

components may break off and

cause injuries.

Do not lift the washing machine by

protruding parts.

■

If the hose and mains cables are not

routed properly, there is a risk of

tripping and injury.

Lay hoses and cables in such a way

that there is no risk of tripping.

Depending on the model

Aquastop

Water inlet

Standard

Installation and

operating instructions

(

Mains cable

Elbow for fixing the

waste water hose

Water

drainage

Covers

Summary of Contents for WLK24261BY











































Search results

Summary of Contents for WLK24261BY

Reviews:

Related manuals for WLK24261BY

Brands by name

Popular brands

Bosch WLK24261BY, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WLK24261BY

Reviews:

Related manuals for WLK24261BY

Brands by name

Popular brands