Bosch WLK24261BY, Instruction Manual And Installation Instructions

Page: 23 / 42

Setting the signal
en
23
M
Setting the signal
Set ti ng the si gna l
1. Activate setting mode for the signal volume
turn to Off hold down + and turn one position to
the right
press and hold the button for approx. five
seconds until the display elements light up
Setting mode is activated.
2. Set the volume for the button signals (depending on model)
press the button until the required volume is
reached
go to
point 3. or
set to
Off
, which exits setting mode for the
signal volume
3. Set the volume for the information signals
rotate it one step to the
right
press the button until the required volume is
reached
set to Off , which exits setting
mode for the signal volume