Bosch WGG256A5NL, User Manual And Installation Instructions

Page: 43 / 60

TroubleshootingNL
Malfunction
"E:36 / -10"
Cause and Troubleshooting
▶
When dosing manually, reduce the amount of
detergent for the next wash with an equal load.
Unauthorized extension mounted on the water drain
hose.
▶
Remove unauthorized extensions from the water
drain hose.
→
†Connecting the device", page 16
Pump cover is not fully screwed in.
▶
Make sure that the pump cover is screwed into the
device as far as it will go. The pump cover handle
must be vertical.
"E:38 / -25 / -26" Drain pump is clogged.
▶
→ †Cleaning the drum", Page 37
if the fault is displayed again,
▶
→
†Cleaning the drain pump", page 39
Inlet opening of the rubber sleeve is clogged.
▶
→ †Clean the inlet opening in the rubber sleeve",
page 41
"E:10 / -00 / -10 /
- 20"
Pump of the intelligent dosing system is blocked.
1.
Turn off the device.
2.
Clean the pump unit.
→ †Cleaning the detergent drawer", Page
37
3.
If the indication reappears, enable the service.
→
†Customer Service", page 55
Remark:You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→ †Buttons", Page 25
"E:60 / -2B" The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
▶
Redistribute the laundry in the drum.
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
43