Bosch WGG256A5NL Page 14 User Manual And Installation Instructions Download

Page: 14 / 60

NLSet up and connect

WARNING

Risk of injury!

When used on a plinth, the device can

tip over.

▶

The device feet for commissioning

on a plinth must be absolutely

with the fixings

→

Page 31from the manufacturer.

installation site

kitchen

Requirements

The device al-

borrow under a

continuous work

place sheet,

that fixed with the

adjacent

cabinet is connected

Pine tree. Required

niche width:

60 cm.

PAY ATTENTION!

Freezing residual water in the device

can damage the device.

▶

Do not place and use the device in

frost-sensitive places or outdoors.

If the device is tilted more than 40°,

residual water can run out of the

device and cause material damage.

▶

Carefully tilt the device.

▶

Transport the device upright.

on a wall

no snakes

between wall and

clamping device

man.

4.4 Removing transport locks

The device is secured for transport

with transport locks at the rear of the

device.

installation site

Plinth

Requirements

The device with

locking lips

→

Page 31

confirm.

Remark:Keep the screws of the

transport locks and the sleeves for

later transport

→

Page 54†

Pull the hoses out of the holders.

Floor with wooden

beams

Place the device

guess at a

resistant

wooden plate (thick-

too minimal

30mm) which

screwed to the

floor.

Summary of Contents for WGG256A5NL





























































Search results

Summary of Contents for WGG256A5NL

Reviews:

Related manuals for WGG256A5NL

Brands by name

Popular brands

Bosch WGG256A5NL, User Manual And Installation Instructions

Search results

Summary of Contents for WGG256A5NL

Reviews:

Related manuals for WGG256A5NL

Brands by name

Popular brands