Home Connect
en
41
5.
Open the Home Connect app on
your mobile device and carry out
the steps in the app.
6.
In the Home Connect app, enter
the network name (SSID) and
password (key) for your home net-
work.
7.
Carry out the steps in the
Home Connect app to connect the
appliance.
a
If the display shows
con
and
lights up permanently, the appli-
ance is connected to the Wi-Fi
home network.
8.
If the appliance is not connected
to the Wi-Fi home network, the dis-
play shows
Err
.
‒
Check whether the appliance is
within the range of the Wi-Fi
home network.
‒
Reconnect the appliance to the
Wi-Fi home network with WPS
function.
9.
Connect the appliance to the
Home Connect app →
.
15.3 Connecting the appli-
ance to the Home Con-
nect app
Requirements
¡
The appliance is connected to the
WLAN home network (Wi-Fi).
¡
The Home Connect app is open
and you have logged on.
1.
Set the programme to position 3.
a
The display shows
APP
.
2.
Press
Start/Reload
.
a
The appliance connects to the
Home Connect app.
3.
Once your appliance is displayed
in the Home Connect app, carry
out the last steps in the
Home Connect app.
a
If the display shows
con
, the appli-
ance is connected to the
Home Connect app.
15.4 Connecting the appli-
ance to the energy man-
ager
The energy manager manages the
power supply from your conventional
and alternative energy sources. If
your alternative energy sources gen-
erate sufficient energy within a
preselected time, the energy man-
ager will start the appliance. If insuffi-
cient energy is generated, the appli-
ance is started using energy from
conventional energy sources.
Requirements
¡
The energy manager uses the EE-
Bus standard.
¡
You have read the user manual for
the energy manager.
1.
Press and hold
Remote Start
for
approx. 3 seconds.
a
The display shows
Aut
.
2.
Set the programme to position 7.
a
The display shows
EnG
.
3.
Press
Start/Reload
.
a
The appliance is connected to the
energy manager.
a
If the appliance has connected to
the energy manager successfully,
the display shows
con
and .
4.
If you want to start the appliance
via the energy manager, activate
Flexstart.
→
