Installation and connection
en-us
11
Washer-dryer stack or free-standing
The appliance can be set up either free-standing or in a
washer-dryer stack.
WARNING
If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall.
▶
Only stack the dryer on a washing machine using the connection kit from the dryer manufacturer . No other installation
method is permitted.
▶
Do not install the appliance in a washer-dryer stack if the dryer manufacturer does not offer a suitable connection kit.
▶
Do not install appliances from different manufacturers and with varying depths and widths in a washer-dryer stack.
▶
Do not install a washer-dryer stack on a platform; the appliances may tip over.
Note:
In case of set up in a washer dryer stack, please observe the requirements for the installation location.
K
J
D
A
E
F
C
B
A
D
C
E
F
H
G
Required space (min.)
A
Both sides
0.6 in.
1.5 cm
B
Top side
6.3 in.
16 cm
C
Rear side
2.5 in.
6.4 cm
D
Front side
2.4 in.
6.1 cm
Keep the clearance on the rear side of the appliance as small as possible, depending on the ventilation openings and the
water connection. For installation in a washer-dryer stack, a larger clearance is required at the rear of the appliance for
the dryer's ventilation openings.
Dimensions of the ventila-
tion openings (min.)
E
Top
63.0 sq. in.
404.0 cm²
F
Bottom
63.0 sq. in.
404.0 cm²
