Bosch WAW285H1UC, Use And Care Manual / Installation Instructions

Page: 18 / 48

18
Electrical connection
9
WARNING
ELECTRICAL SHOCK HAZARD
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if
you are in doubt as to whether the appliance has
been properly grounded.
9
WARNING
ELECTRICAL SHOCK HAZARD
To reduce the risk of fire or electrical shock, DO
NOT use an extension cord to connect the washing
machine to the power supply.
9
WARNING
ELECTRICAL SHOCK HAZARD
To reduce the risk of electrical shock:
▯
Only pull out the power cord by the plug end and
never by the cable, as this could damage it.
▯
Never touch or hold the plug end or power cord
with wet hands.
▯
Never unplug the power cord during operation.
GROUNDING INSTRUCTIONS
9
WARNING
ELECTRICAL SHOCK HAZARD
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electric shock by providing a path of least
resistance for the electric current. This appliance is
equipped with a cord that has an equipment
grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance
with all local codes and ordinances.
▯
Do not modify the plug provided with the appliance. If
the plug will not fit into the outlet have a properly
grounded outlet installed by a qualified electrician. Do
not cut, remove or bypass the grounding prong on the
washer power cord plug.
▯
The washer power cord plug must be easily
accessible when the washer is operating.
▯
When unplugging or plugging in the washer power
cord, grasp the plug end. Do not pull on the cable to
unplug the washer.
▯
The household electrical supply must be suitable for
the voltage specification shown on the washer rating
plate (located inside the washer door, immediately
below the drum opening).
~
Purchase information; Page 5
See below for connection specifications and fuse/
breaker requirements.
▯
The wiring for the electrical outlet circuit must be
sufficient to meet the appliance requirements. Use of a
Ground Fault Circuit Interrupter (GFCI) is
recommended.
▯
Protect the power cord from physical damage, such as
being twisted, kinked, pinched, caught in a door, or
walked upon.
▯
If the power cord is damaged, it must be replaced by a
qualified authorized service provider to avoid a fire/
shock hazard. Replacement power cords can be
purchased through Customer Service.
~
Customer Service; Page 5
▯
The washing machine must only be connected to an
individual branch circuit via a receptacle which has
been properly installed and grounded.
▯
Make sure that:
- the power plug fits into the receptacle
- the wire size is sufficient
- the grounding system is properly installed
▯
The power cord may be replaced by an electrician
only. Replacement power cords can be purchased
from Customer Service. To reduce the risk of fire or
electrical shock, DO NOT use an extension cord to
connect the washing machine to the power supply. If a
ground fault circuit breaker is to be used, only use the
types marked with the following symbol:
z
. Only this
symbol can assure compliance with all current
regulations.
Transporting the washer
Before transporting the washer
1.
Disconnect the washer power cord from the wall
outlet.
2.
Turn off the water supply to the washer.
3.
Disconnect water supply lines from the tap.
4.
Disconnect the drain hose from the drain location.
5.
Install the transport bolt assemblies as shown in the
following images.
9
CAUTION
Carefully drain residual water from inlet and drain
hoses. Secure all hoses and power cord to the back
of the washer to prevent them from being damaged.