Bosch WAU28PH5NL User Manual And Installation Instructions Download Page 14

Page: 14 / 68

NLSet up and connect

4.3 Installation site

requirements

installation site

Requirements

Floor with wooden

beams

Place the device

guess at a

resistant

wooden plate (thick-

too minimal

30mm) which

screwed to the

floor.

WARNING

Risk of electric shock!

The device contains live parts.

Touching live parts is dangerous.

▶

Do not use the appliance without

a cover.

kitchen

The device al-

borrow under a

continuous work

place sheet,

that fixed with the

adjacent

cabinet is connected

Pine tree. Required

niche width:

60 cm.

WARNING

Risk of injury!

When used on a plinth, the device can

tip over.

▶

The device feet for commissioning

on a plinth must be absolutely

with the fixings

→

Page 32from the manufacturer.

on a wall

no snakes

between wall and

clamping device

man.

PAY ATTENTION!

Freezing residual water in the device

can damage the device.

▶

Do not place and use the device in

frost-sensitive places or outdoors.

If the device is tilted more than 40°,

residual water can run out of the

device and cause material damage.

▶

Carefully tilt the device.

▶

Transport the device upright.

4.4 Removing transport locks

The device is secured for transport

with transport locks at the rear of the

device.
Remark:Keep the screws of the

transport locks and the sleeves for

later transport

→

Page 59†

installation site

Plinth

Requirements

The device with

locking lips

→

Page 32

confirm.

Summary of Contents for WAU28PH5NL





































































Search results

Summary of Contents for WAU28PH5NL

Reviews:

Related manuals for WAU28PH5NL

Brands by name

Popular brands

Bosch WAU28PH5NL, User Manual And Installation Instructions

Search results

Summary of Contents for WAU28PH5NL

Reviews:

Related manuals for WAU28PH5NL

Brands by name

Popular brands