en
Home Connect
44
3.
To end the setting process, wait
briefly.
Note:
To adjust the basic dosage for
, repeat the steps with
i-DOS
.
Home Connect
Home Connect
Home Connect
This appliance is network-capable.
Connecting your appliance to a mo-
bile device lets you control its func-
tions via the Home Connect app, ad-
just its basic settings and monitor its
operating status.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi) with
WPS function", Page 44
¡
"Connecting the appliance to a
WLAN home network (Wi-Fi)
without WPS function", Page 45
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tips
¡
Please consult the documents sup-
plied by Home Connect.
¡
Please also follow the instructions
in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect set-
tings in the basic settings for your ap-
pliance. Which settings the display
shows will depend on whether
Home Connect has been set up and
whether the appliance is connected
to your home network.
Connecting the appliance to a
WLAN home network (Wi-Fi)
with WPS function
Using your router's WPS function is
the simplest way to connect the ap-
pliance to your home network.
Requirement:
If your router has a
WPS function, you can connect the
appliance to your WLAN home net-
work (Wi-Fi) automatically.
1.
Press and hold for approx. 3
seconds.
a
The display shows
Aut
.
2.
Press
.
3.
Press the WPS button on the
router within the next 2 minutes.
Take note of the information in the
documents for your router.
a
flashes in the display.
a
The appliance attempts to connect
to your WLAN home network.
a
If the display shows
con
and
lights up permanently, the appli-
ance is connected to the home
network.
Summary of Contents for WAU28PAHSN
Page 71: ......