5
6
a
$
$
lights
opened. If required, add /remove a laundry item; if
and
are displayed alternately, the door cannot be
h
$
2
$
>
$
(
(Childproof lock)
Programme cannot be changed by accidental operation.
To activate the childproof lock:
– After the programme starts, press and hold the
(
button for 5 seconds;
– Release when the
(
symbol lights up.
When the programme ends, the
Start/Reload
$
indicator remains on to remind you to
deactivate the childproof lock.
*
(
symbol flashes if the programme has been changed while childproof lock is activated.
To deactivate the childproof lock:
– Touch and hold the
(
button until the
(
symbol turns off;
– Release the button.
If the childproof lock is deactivated while the programme selector is in a different position
from when the childproof lock was activated*, the current programme will be halted.
ʑ
Additional functions
See also Programme overview
a
page 7
Ĉ
SpeedPerfect
For washing in a shorter time with a washing result
comparable to that of the standard programme.
ć
EcoPerfect
For saving energy with a washing performance
comparable to that of the standard programme.
2
Extra Rinse
Additional rinse cycle. Prolonged programme duration.
For areas with very soft water or for further improving the
washing result.
7
Prewash
Activate prewash. For heavily soiled, hard-wearing
textiles, e.g. made of cotton or linen.
The additional function indicator light is on when this option is selected; if this option cannot
be selected for the programme, this is indicated by a short flashing of the light and an
acoustic signal.
ʑ
$
Start/Reload
To start or pause the programme.
ʑ
Signals
Set to
Â
Press and
hold
1 step
clockwise
Button signals
Information signals
Set volume*
Set volume*
1 step
clockwise
Set to
Â
1. Start signal mode
2. Set volume for ...
Release
#
*If required, set repeatedly
1 step
clockwise
direct
a
a
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
?
?
ć
a
~
ʋ
ʋ
ʋ
ʑ
Display symbols
ʑ
Display information
Before starting a programme, the max. load
for the selected programme is displayed
when the door is open. The remaining time
or finish-in time is displayed when the door
is closed.
*Display shown may vary depending on the
model and selected programme
.
ʑ
Option buttons
You can change the spin speed and temperature beforehand and while the selected programme is running. The effects
depend on the progress of the programme.
°C
(
Temp.
)
You can change the indicated washing temperature. The maximum washing temperature that can be selected
depends on the programme that has been selected
.
(Finish in)
When you select a programme, the respective programme duration is displayed. You can delay the start of the
programme before it begins. The finish-in time indicates when the programme will be finished. It can be set in hourly
increments up to a maximum of 24 hours. Press and hold the
(
Finish-in
)
button until the required number of hours
is shown
(
h=hour
).
Select
Start
/
Reload
$
.
(Spin speed)
You can change the indicated spin speed. The maximum spin speed which can be selected depends on the selected
programme
.
If
is selected, the load is held in the rinsing water
.
1
Washing
:
On if wash process is running
.
Rinse
:
On if rinse process is running
.
Spin
:
On if spin process is active
If the symbol
c
flashes
a
page 10
+
Water tap
:
Flashing if tap not open or no water supply
.
Door
:
On if door can be opened
.
Overdosage
:
On if too much detergent used
.
Automatic load detection
:
Automatically detects the
load size after the water inlet phase and sets the accurate remaining
time. Symbols indicate small, medium and full loads measured*
according to the recommended max. load for the selected
programme
.
*
Automatic display of the detected load only for washing
programmes with a max. load recommendation > 3.0 kg except for
Rinse, Spin and Drain. Different types of textiles with different water
absorption rates may influence the load display
.
kg
,
e.g
.
kg
*:
max. recommended load for selected programme
a
page 7
,
Programme overview
time
,
e.g
.
*:
remaining time
*:
finish-in time defined by user
a
page 5
:
pause
:
door can be opened in “Pause” status
:
end of programme
:
end of programme with the
setting
:
set volume of signals
a
page 6
:
Information on the display
a
page 10
>
or
$
ting.
Â
a
?
I
1
ߣ
:
O
.
>
2
$
E
ā
~
Display information, Options, Functions
Options, Functions
$
(
a
a
?
Ĉ
ć
2
7
ā
E
Ĉ
ć
2
7
I
Ĉ
ć
2
7
1
Ĉ
ć
2
7
Ĉ
ć
2
7
$
:
O
Ĉ
2
.
Ĉ
2
2
>
7
Ĉ
