en
Installing and connecting the appliance
16
Caution!
Water damage
When water is being pumped away, the
outlet hose is under high water pressure
and may slip out of the wash basin or
connection point.
Secure the outlet hose so that it cannot
slip out.
Caution!
Damage to the appliance/fabrics
If the end of the outlet hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Ensure the following:
■
The plug must not block the drain of
the wash basin
■
The end of the outlet hose must not
be immersed in drained water
■
The water must drain off quickly
Connect the water outlet hose as
follows:
■
Drainage into a wash basin
■
Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24–40 mm (available
from specialist dealers).
■
Drainage into a plastic pipe with
rubber sleeve or into a gully
Electrical connection
:
Warning
Risk of electric shock/fire/material
damage/damage to the appliance!
If the appliance is not installed properly,
this may lead to a dangerous situation.
Ensure the following:
■
The mains voltage on your power
socket must match the rated voltage
specified on the appliance
(identification plate). The connected
loads and the required fuse
protection are specified on the
identification plate.
■
The mains plug and the protective
contact socket must match and the
earthing system must be correctly
installed.
