Bosch WAK18065SG Page 28 Instruction Manual And Installation Instructions Download

Page: 28 / 36

Positioning and connecting

Notes

■

Recess width of 60 cm required.

■

Only install the washing machine

underneath a continuous worktop

that is securely connected to

adjacent cabinets.

Removing the transport locks

Caution!

Damage to the appliance

■

The machine is secured for

transportation using transport locks.

If the transport locks are not

removed, the drum, for example,

may become damaged when the

machine is operated.

Before using the appliance for the

first time, make sure that you

completely remove all four transport

locks. Keep the locks in a safe

place.

■

To prevent transport damage from

occurring if the appliance is moved

at a later date, you must refit the

transport locks before transporting

the appliance.

Note:

Keep the screws and sleeves in

a safe place.

Take the hoses out of the holders.

Unscrew and remove all four

transport brace screws.

Remove the sleeves. To do this,

remove the mains cable from the

holders.

Fit the covers. Lock the covers firmly

in place by applying pressure to the

snap-in hooks.

Hose and cable lengths

■

Left-hand connection

PD[FP

aFP

Summary of Contents for WAK18065SG





































Search results

Summary of Contents for WAK18065SG

Reviews:

Related manuals for WAK18065SG

Brands by name

Popular brands

Bosch WAK18065SG, Instruction Manual And Installation Instructions

Search results

Summary of Contents for WAK18065SG

Reviews:

Related manuals for WAK18065SG

Brands by name

Popular brands