Bosch WAK18065SG, Instruction Manual And Installation Instructions

Page: 18 / 36

en
Sensors
18
Cancel the programme
Programmes at high temperatures:
1.
Press Start/
Pause
A
.
2.
To cool the laundry: Select
O
Rinse
.
3.
Press
Start
/Pause
A
.
For programmes at low temperatures:
1.
Press Start/
Pause
A
.
2.
Select
0
Spin
or
Drain
[
.
3.
Press
Start
/Pause
A
.
Programme end
Indicator lamp
0
for
f
flashes and the
Start/Pause
A
button indicator lamp is
off.
Removing laundry/switching
off the appliance
1.
Open the washing machine door
and remove the laundry.
2.
Set the programme selector to off
position. The appliance is switched
off.
3.
Turn off the water tap.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.
■
Always wait for the end of the
programme, otherwise the appliance
may still be locked. Then switch on
the appliance and wait for it to
unlock.
■
If the display panel goes off at the
end of a programme, energy-saving
mode is active. To activate the panel,
press any button.
H
Sensors
Sensors
Automatic load sensing
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note:
Place large and small items of
laundry evenly in the drum.
Faults and what to do about them
~
Page 21