Bosch Security Systems | 2003-11
EN
| 5
VSS7915/00T & VS79155T
| Installation Instructions
Sunken mount
•
Using the inside of the frame plate as a template, mark the
position of the hole required for the unit.
•
Cut out the center hole.
•
Use the four tamper-resistant screws (4
x
50mm) and clips to attach
the frame plate to the surface (use the outer holes).
•
If you want to mount the mounting box directly onto a wall
instead, break out the four tabs in the mounting box and drill
holes for the four 3.5
x 25mm screws (use plugs if necessary).
Four tamper-resistant
screws 4
x
50mm with clips
Four short screws
Frame plate
Tamper-resistant screw 3
x
10mm
Mounting box
EazeoVideoIntercom.book Page 5 Thursday, December 18, 2003 5:57 PM
