Bosch Security Systems | 2003-11
EN
| 9
VSS7915/00T & VS79155T
| Installation Instructions
Adjustments and switches
The printed circuit board has an loudspeaker level potentiometer,
two DIP switches and an anti-tamper alarm switch.
Anti-tamper switch override
When the unit is removed from the mounting box the anti-tamper
switch triggers an alarm on the monitor. To suppress this alarm while
servicing the system, set the tamper override DIP switch to the On
position. Don’t forget to reactivate the anti-tamper switch by
switching the override to the Off position.
DIP 2
Anti-tamper
override switch
(default Off)
Anti-tamper
switch
Loudspeaker
level
adjustment
DIP 1
default Off
EazeoVideoIntercom.book Page 9 Thursday, December 18, 2003 5:57 PM
