26
en | Maintenance
VIP X16 XF E
F.01U.281.864 | V2 | 2012.12
Installation Manual
Bosch Sicherheitssysteme GmbH
8
Maintenance
8.1
Updates
Firmware updates are carried out via Bosch Video Client or other management systems in use.
Please refer to the relevant documentation.
8.2
Factory reset
You can use the factory reset button to restore the unit to its original settings. Any changes to
the settings are overwritten by the factory defaults. A reset may be necessary, for example, if
the unit has invalid settings that prevent it from functioning as desired.
1.
All configured settings will be discarded during a reset.
If necessary, back up the current configuration beforehand: Enter the IP address of the
unit as URL in the Web browser and use the
Download
button on the
SETTINGS
>
Advanced Mode
>
Service
>
Maintenance
configuration page.
2.
Using a pointed object, press the factory reset button located on the front panel until the
STATUS
LED flashes. All settings will revert to their defaults.
3.
The unit is ready for use as soon as the
CONNECT
LED lights up.
4.
See the relevant chapter in this manual for information on configuration of the unit.
Further topics:
–
Section 3.4 Connections, controls and displays, page 11
–
Section 6 Configuration, page 20
8.3
Repairs
–
Never open the housing of the unit. The unit does not contain any user-serviceable parts.
–
Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists). In case of doubt, contact your
dealer's technical service center.
