AutoDome Easy II
Installing a Surface Mount | en
19
Bosch Security Systems, Inc.
User Manual
F.01U.139.424 | 2.0 | 2009.08
3.
Secure the mounting plate to the junction box with the
user supplied hardware (see
Figure 4.3
). Proceed to
Section 4.1.3 Installing the Camera to the Mounting Plate,
page 19
.
Figure 4.3
Install the Mounting Plate
4.1.3
Installing the Camera to the Mounting Plate
To install the camera to the mounting plate for a surface or
suspended ceiling, do the following:
1.
Route wires on side of mounting plate with crescent
shaped cut-out (Ref. #2
Figure 4.3
).
2.
Attach grounding wire from unit to junction box (see
Figure 4.5
).
3.
Attach user supplied ground to junction box.
4.
Connect the mating connectors with the flying leads to the
user supplied wiring (see the
AutoDome Easy II User Manual
for wiring information).
Reference #
Description
1
Junction Box Holes
2
Cable Hole (40 mm maximum); Crescent Shape
3
Mounting Plate
4
Junction Box
0
40
.0 mm
1.57
in.
9 .
0 mm
3.54 in.
