36
en | Operation
EX65 Explosion-Protected Camera
Selecting an area for VMD masking
To set up an area for VMD masking, access the area menu by selecting the VMD Area option
from the VMD menu. Upon entering the Area menu, the current area is displayed with the
upper left corner flashing. You can move the flashing corner of the image with the Up, Down,
Left, Right arrow keys. Press the Select key to move the flashing cursor to the opposite
corner, which can now be moved. Press Select again to freeze the area and exit the area
menu.
There is one programmable VMD area.
Note:
When VMD is enabled, normal light fluctuations or environmental factors can contribute to
false-positive alarms. Because of this, it is recommended that you do not connect the VMD-
triggered alarm output of the camera to a monitored alarm system as the false-positive alarms
may be considered a nuisance.
8.5
Install menu structure
Item
Selection
Description
Language
Submenu
Select on-screen display (OSD) language
Lens Wizard
Submenu
Select to optimize the camera-lens combination
backfocus point.
Synchronization Submenu
Sets synchronization parameters
Alarm I/O
Submenu
Program the alarm input and output functionality.
Connections
Submenu
Connection parameters
Test signals
Submenu
Test patterns and texts
Camera ID
Submenu
Select to access ID submenu
Privacy masking Submenu
Sets up a masking area
Default ALL
Submenu
Returns all settings for all modes to factory defaults
8.5.1
Language submenu
Item
Selection
Description
Language
English
Spanish
French
German
Portuguese
Polish
Italian
Dutch
Russian
Displays the menus on the OSD in the chosen language.
EXIT
Returns to Install menu.
2016.03 | 1.0 | F.01U.318.222
Installation Manual
Bosch Security Systems, Inc.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
