Bosch Security Systems | 2003-06
VSS8394/01T Multiplexer
| Installation Manual | Chapter 2
EN
| 9
2.4.6 Recorder
You can set up the Video Recorder from the system
menu:
Multiplexer Setup
Note
The default mode is 1VEXT. For applications where
you want to playback time lapse recordings at real-time
speed, you have to select 2VEXT for recording.
2.4.7 Remote Surveillance
This enables the system to use functionality available
with a remote surveillance unit. Menu and playback
video will be presented on slave output.
DWELL TIME
Change the image sequence
dwell time (programmable
between 02 and 30 secs).
AUDIO SOURCE
Selected Audio source is auto-
matically displayed.
M A I N M E N U
S Y S T E M S E T T I N G S
R E C O R D E R
PLAYBACK DETECTION
O N
R E C O R D M O D E
FOLLOW DISPLAY
M U L T I P L E X E R S E T U P
PLAYBACK
DETECTION
By connecting the input and
output from the same Video
Recorder you can have an auto-
matic playback detection.
ON This allows you to switch on
the Video Recorder playback
and the system will automatically
detect the Video Recorder has
been switched on for playback.
OFF The playback detection is
disabled. You can select the
Video Recorder playback by
accessing the main menu and
selecting
“SWITCH TO PLAYBACK
VIEW”
RECORD MODE
FOLLOW DISPLAY
The Video Recorder will record
the same image(s) as displayed
on the monitor, (e.g. if the cam-
era image is changed on the
monitor, this image is also
recorded on the Video
Recorder).
MULTIPLEXING
All camera images are recorded
in a fast sequence at full resolu-
tion.
M A I N M E N U
S Y S T E M S E T T I N G S
R E C O R D E R
M U L T I P L E X E R S E T U P
A U D I O S O U R C E
1
VI D E O O U T
MULTIPLEX ING
S W I T CH C A M E R A A F T E R
1 VE X T
I N T E R L E A V E
D U R A T I O N
A L A R M / M O T I O N O F F
0 5 S E C
D O O R B E L L O F F
0 5 S E C
AUDIO
SOURCE
Select the camera from which the
audio will be recorded (camera 1 to
8).
VIDEO OUT
The default mode is MULTIPLEX-
ING which is used for recording.
During playback, you can select
FOLLOW PLAYBACK so that the
playback images being displayed
are sent to Video Out.
SWITCH
CAMERA
AFTER
1VEXT/2VEXT VEXT is a synchroni-
zation pulse coming from the video
recorder to the multiplexer. With
every VEXT pulse the Multiplexer
sends the next camera image to the
recorder. If you select 2VEXT, after
2 pulses the next image is sent to
the recorder.
INTER-
LEAVE
On / Off In interleave mode an alarm
camera is recorded more frequently.
This provides alarm images with a
higher update rate. For ALARM/
MOTION and DOORBELL activities
you can switch interleaving ON or OFF
and the duration time can be pro-
grammed between 5 sec. and 5 min.
