Product Information
Uni Condens 8000 F – 6720867069 (2016/10)
4
H
Combustion/room air
▶ Keep the combustion/ambient air free of corrosive
substances (e.g. halogenated hydrocarbons that
contain chlorine or fluorine compounds). This will
help to prevent corrosion.
▶ Keep the combustion air supply free of dust.
H
Danger posed by explosive and easily
flammable materials
▶ Never use or store easily flammable materials (e.g.
paper, thinners, paints, etc.) near the appliance.
H
Heating system damage due to frost
When the heating system is not in operation (e.g.
controller switched off, fault shutdown), there is a risk
of it freezing when there is frost.
▶ When shutting down or switching off for extended
periods, drain the heating and drinking water pipes
to the lowest point in order to protect the heating
system from freezing.
H
Inspection and servicing
▶
Recommendation for customers:
Arrange a
maintenance and inspection contract with an
approved contractor, covering an annual inspection
and responsive maintenance.
▶ The user is responsible for ensuring the heating
system is safe and environmentally compatible.
▶ Immediately correct all faults to prevent system
damage!
▶ Use only genuine spare parts from the
manufacturer. Losses caused by the use of spare
parts and accessories not supplied by the
manufacturer are excluded from the manufacturer's
warranty.
H
Handover to the user
When handing over, instruct the user how to operate
the heating system and inform the user about its
operating conditions.
▶ Explain how to operate the heating system and draw
the user's attention to any safety relevant action
▶ Explain that conversions and repairs must only be
carried out by a competent person.
▶ Point out the need for inspections and maintenance
for safe and environmentally-compatible operation.
▶ Leave the installation instructions and the
operating instructions with the user for
safekeeping.
2
Product Information
2.1
Declaration of Conformity
The design and operation of this product comply with European
Directives and the supplementary national requirements. Conformity
has been demonstrated by the CE marking.
You can ask for a copy of the declaration of conformity for this product.
For this see the contact address on the back cover of these instructions.
2.2
Determined use
The Uni Condens 8000 F 800...1200 floor standing condensing boiler
has been designed for wet heating systems in (e.g. apartment buildings
or industrial applications).
The boiler is only approved for open-flue mode.
When installing and operating the heating system:
• Comply with standards, regulations and guidelines of the relevant
country.
• Observe the information on the data plate of the boiler.
2.3
Symbol at the boiler
2.4
Data plate
If you contact the manufacturer with any questions about this product,
always provide the details on the data plate. If we have these details, we
can quickly answer your specific query.
The details on the data plate are binding and must be observed!
You will find information such as the serial number, output and approval
details on the data plate.
2.5
Product Description
The Uni Condens 8000 F 800...1200 is a floor standing condensing
boiler with a slim, compact design and a small footprint, comprising a
combustion chamber located at the top and a condensation heating
surface located at the bottom.
With the Uni Condens 8000 F 800...1200 floor standing condensing
boilers, all parts that come into contact with products of combustion or
condensate are made from high grade stainless steel. This makes
operation possible without limitations on the flow and return
temperature, the flow rate or the burner low load.
The Uni Condens 8000 F 800...1200 is also referred to in this manual as
UC8000F 800...1200, boiler or heat source.
The boiler has two separate thermohydraulic return connections for the
high and low temperature heating circuits (
fig. 1, page 5).
The Uni Condens 8000 F 800...1200 must be equipped with a burner
that is suitable for the boiler.
The main components of the boiler are (
fig. 1, page 5):
• Boiler shell [1] in conjunction with a burner
The boiler block transfers the heat produced by the burner to the
heating water.
• Thermally insulating casing
The boiler shell and thermal insulation reduce energy losses.
• Control unit (accessory) [8]
The control unit monitors and controls all electrical boiler
components.
This symbol is used to point out that the installation and
operating instructions must be read prior to installation
operation or maintenance in order to prevent damage to the
system.
