Bosch UML-323-90, User Manual

Page: 34 / 41

34 en | Navigating the Monitor Bosch High Performance HD LED Monitors
F.01U.134.499 | 2.0 | 2012.10 User's Manual Bosch Security Systems, Inc.
Display Wall If multiple monitors are tiled to form a display wall, use this function to
set up the display wall settings:
– H Monitors : selects the number of displays on the horizontal side
(range 1-10).
– V Monitors : selects the number of displays on the vertical side
(range 1-10).
– H Position : selects the horizontal position of the monitor in the
display wall matrix (range 1-10).
– V Position : selects the vertical position of the monitor in the
display wall matrix (range 1-10).
– Frame Comp. : turns frame compensation on or off. If turned on,
the monitor adjusts the image to compensate for the width of the
bezels in order to accurately display the image.
Power Save Sets the monitor to reduce the power consumption:
– Eco : all sources can enter the power saving mode, but only a VGA
signal can wake up the monitor or you have to press the Power
button to wake up the monitor when other source is connected.
– Standard : all source can enter the power saving mode and wake up
the monitor.
– Off : if no source is detected, the backlight remains on.
– VGA Only : only a VGA signal can enter the power saving mode and
wake up the monitor.
Set Monitor ID Sets the ID number for controlling the monitor via the RS 232
connection. Each monitor must have a unique ID number when multiple
monitors are connected. Each monitor’s ID is defined by its position
within the matrix - starting on the top row, working left to right. The top
left monitor will have an ID of 1. When you reach the end of the row, the
next number will refer to the monitor one row down, starting at the left.
Image Retention If turned on, the LCD monitor automatically displays swift moving
patterns to prevent the formation of image retention on the screen.
Auto Adjustment Turns on or off to let the monitor auto synchronizes screen to graphics
adaptor.
Advanced – Restore User Default : restores default settings.
– OSD Info Box : when turned ON, the monitor always displays the
current input source and resolution. Select OFF to display the
information box only when you press Info on the remote control.
– Thermal (°C) : displays the thermal status (temperature) inside the
display.
– Ambient Light (Lux) : displays the ambient brightness detected by
the display’s sensor.
– 5V Detect (V) : displays the 5V voltage detection result.
– 12V Detect (V) : displays the 12V voltage detection result.
– Operating Time (Day & hr) : displays the duration the display has
been turned on.
– Input Source : displays the selected input source.
NOTICE!
When Key Lock is enabled through the front panel, use the front panel buttons to disable the
key lock command. To disable the Key Lock feature using the front panel buttons, press and
hold both the INPUT (or ENTER) and the MENU buttons until the monitor displays the Key
Unlocked message.