General Purpose LCD Monitors
Power Management | en
21
Bosch Security Systems, Inc.
User’s Manual
F.01U.078.454 | 1.0 | 2008.03
6.10
Exit
To access the Exit submenu, press the Menu button on the front panel of the monitor, then
press the left and right arrows to select the Exit icon, then press the menu buttons to exit the
OSD.
7
Power Management
These monitors feature a power management system to “power down” upon receipt of the
display power management signaling (DPMS) from a DPMS video card.
To conserve energy and extend monitor life, these monitors automatically start a power saving
mode when the input signal disappears (such as when a PC enters sleep mode). The power
saving mode is active when the LED on the control button panel switches from green to amber
and normal operation resumes automatically when the input signal is restored.
The monitor enters an appropriate mode through identifying each of the three modes of the
signaling system.
7.1
Power Consumption
7.2
LED Indicator
The power management feature of the monitor is comprised of four stages: On (green),
Standby (amber), Unsupported mode (green), and Power Off (red).
Submenu
Definition
Recall
Restores default settings.
AUTO Full Auto
Auto synchronizes the screen to the graphics adaptor. When selected,
displays “Auto in Process...”.
Lock
Locks user from accessing the monitor OSD menus. To unlock, hold
down the menu and up arrow keys together for three (3) seconds.
Exit
H: 63.1KHz
PC
V: 70.0Hz
VER. 1.0
Move:
EXIT: MENU
Mode
150
170
190
ON
25 W
40 W
45 W
STANDBY
< 5.0 W
< 5.0 W
< 5.0 W
Summary of Contents for UML-150-90
Page 1: ...General Purpose LCD Monitors UML 150 90 UML 170 90 UML 190 90 en User s Manual ...
Page 2: ......
Page 31: ......
