General Purpose LCD Monitors
Installing the Monitor | en
13
Bosch Security Systems, Inc.
User’s Manual
F.01U.078.454 | 1.0 | 2008.03
5.2.2
Wall Mount Installation
The square mounting holes (100 mm [3.9 in.] centers) are compatible with the Bosch UMM-
LW-20B fixed wall mount or the UMM-LW-30B swivel/tilt. To install the wall mount, do the
following:
1.
Remove the base from the LCD panel section by unscrewing the four (4) holding screws
before separating the base from the panel. NOTE: Save screws for future use.
Figure 5.1
Removing the Base
2.
Mount the unit to the mounting device (not provided) using the four (4) mounting holes
on the rear panel. The square mounting hole patterns are standard on 100 mm (3.9 in.)
centers.
Figure 5.2
Mounting the Device
Summary of Contents for UML-150-90
Page 1: ...General Purpose LCD Monitors UML 150 90 UML 170 90 UML 190 90 en User s Manual ...
Page 2: ......
Page 31: ......
