16
en | Installation
UHI/UHO Series
F.01U.026937 | V 2.0 | 2007.01
User Manual
Bosch Security Systems
Fig. 4.1
Thread holes for mounting with rear connections, or for feed
through wiring
4.5
Opening the cover
Open the cover by unlatching the three latches on the side of
the housing. See
Figure 4.2
. If the optional tamper-resistant
screws have been installed, use the supplied wrench to remove
the screws before opening the latches.
Fig. 4.2
Unlatching the cover
4.6
Camera/Lens installation
1.
Remove the two screws holding the camera tray to the
housing. Remove tray from the housing.
2.
If using the feed-through feature, refer to
Section 4.7.3 Feed-through Wiring
.
For mounting with feed-through wiring
For mounting with rear connections
!
WARNING!
The heater will be HOT when in operation - DO NOT TOUCH.
Always switch heater OFF when working on the camera.
Latches
Summary of Contents for UHI-OG-0
Page 2: ......
Page 10: ...10 en UHI UHO Series docnumber V 2 0 2007 01 User Manual Bosch Security Systems ...
Page 31: ......
