6 720 800 095 (2014/05)
Therm 6000S
18 | Installation instructions
5.8 Installation of the exhaustion accessory and
admission of air
For the installation of the acce
ssory they should be following
the manufacturer's instructions.
5.8.1 Installation of the accessory of admission of air
To install the accessory of admiss
ion of air, proceed as follow;
Put the gasket between the appliance and the accessory
(Fig. 27, [1].
Tighten the 4 screws of the
accessory of admission of air
(Fig. 27, [2]).
Fig. 27
5.8.2 Installation of the exhaustion accessory Ø 80mm
To install the accessory of the exhaustion accessory, proceed
as follow;
Put the gasket between the
appliance and the accessory
(Fig. 28, [1]).
Tighten the 3 screws of the exhaustion accessory (Fig. 28,
[2]).
Fig. 28
It is mandatory the
installation of the
accessories for the exhaustion / admission of
air, cód. 7 709 003 734 (system of
admission / exhaustion Ø80/80 mm).
WARNING:
This appliance is required to be
connected to a dual
duct flue system
incorporating separate paths for
provision of the combustion air and the
exhaust of the combustion products to
and from the exterior of the building. Note
the manufacturer's specific instructions
regarding installation of the appliance.
6720608920-24.1AL
2.
1.
2.
2.
2.
6720608920-25.1AL
2.
1.
2.
2.
