31
TES552... | 05/2013
en
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew.
Tip:
If possible, use only beans for fully
automatic coffee and espresso machines.
For optimal quality, deep-freeze the beans
or store in a cool place in sealed containers.
Coffee beans can be ground while frozen.
Important:
Fill the water tank (16) with
fresh water every day. The tank (16) should
always contain sufficient water for operating
the appliance.
Different coffee drinks can be prepared
quite simply at the press of a button.
Preparation
The appliance must be ready for use.
1. Place the pre-warmed cup(s) under the
coffee outlet (7).
Tip:
For a small espresso, always pre
-
heat the cup, e.g. using hot water.
2. Select the required coffee and the
required per-cup quantity by turning the
upper rotary knob (14). The selected
coffee and the per-cup quantity are
shown in the display.
3. Select the required coffee strength by
turning the lower rotary knob (13). The
selected coffee strength is shown in the
display.
4. Press the
start
button (10).
The coffee is brewed and then dispensed
into the cup(s).
Press the
start
button (10) again to cut the
brewing process short.
Preparation using
ground coffee
This fully automatic espresso machine can
also be operated with ground coffee (not
instant coffee powder).
Important:
Fill the water tank (16) with
fresh water every day. The tank (16) should
always contain sufficient water for operating
the appliance.
Preparation
1. Open the drawer (4).
2. Pour in no more than 2 level measuring
spoons of ground coffee.
Warning
: Do not use whole beans or
instant coffee.
3. Close the drawer (4).
4. Select the required drink by turning the
upper rotary knob (14) (only one cup
possible).
5. Press the
start
button (10).
The coffee is brewed and then dispensed
into the cup.
N.B.:
Repeat the procedure for another
cup of coffee. If no coffee is taken within
90 seconds, the brewing chamber empties
automatically to avoid overfilling. The appli
-
ance rinses.
Dispensing hot water
¡
Risk of burns
The milk frother (6) gets very hot. Hold the
milk frother (6) by the plastic part only.
The appliance must be ready for use with
the cleaned milk frother attached.
1. Place the pre-warmed cup or glass
under the outlet of the milk frother (6).
2. Pull the milk frother (6) to open it. The
appliance heats up. Hot water runs out
of the milk frother outlet (6) for about
40 seconds.
3. Stop the process by pushing in the milk
frother (6).
TES55236RU.indb 31
04.06.2013 14:35:45
Summary of Contents for TES55236
Page 3: ...A 9 11 12 13 14 15 16 17 1 2 3 10 4 5 6 7 8 TES55236RU indb 3 04 06 2013 14 35 33 ...
Page 4: ...D C B 19 18 20 8e 8a 8b 8c 8d 6a 6c 6d 6e 6b TES55236RU indb 4 04 06 2013 14 35 33 ...
Page 5: ...E 5b 5d 5c 5a TES55236RU indb 5 04 06 2013 14 35 34 ...
