28
Robert Bosch Hausgeräte GmbH
en
15. Push the milk frother (6) in to close it.
The appliance heats up and rinses. Some
water will run out of the coffee outlet.
When the drink selection menu is shown in
the display, the appliance is ready for use.
Switching off the appliance
If the appliance has not been used for
an hour, it rinses automatically and then
switches off (time span can be programmed,
see “Menu settings”
Shut off
on page 29).
Exception:
The appliance switches off
without rinsing if only hot water or steam
were dispensed.
To switch the appliance off manually before
this, press the
e
off /
j
button (12). The
appliance rinses and switches off.
N.B.:
If the appliance is being used for the
first time, a service program has been run,
or the appliance has not been operated
for a long period, the first beverage will
not have the full aroma and should not be
consumed.
When using the espresso machine for the
first time, you will achieve a suitably thick
and stable “crema” only after the first few
cups have been dispensed.
After extended use, water droplets may
form on the ventilation slots. This is normal.
Water filter
A water filter can prevent scale buildup.
Before a new water filter is used, it must be
rinsed. To do this, proceed as follows:
1. Press the water filter firmly into the
water tank with the aid of the measuring
spoon (18).
2. Fill the water tank (16) with water up to
the
max
mark.
3. Press and hold the
e
off /
j
button (12)
for at least three seconds. The menu
opens.
4. Press the
e
off /
j
button (12)
repeatedly until the display shows
No / Old filter
.
5. Select
Activate filter
with the upper
rotary knob (14).
6. Press the
start
button (10).
7. Place a receptacle with a capacity of
0.5 litres under the outlet.
8. Press the
start
button (10).
9. Pull the milk frother (6) to open it.
10. Water will now flow through the filter to
rinse it.
11. Push the milk frother (6) in to close it.
12. Empty the container.
The appliance is ready to use once more.
Note:
Rinsing the filter simultaneously acti
-
vates the setting for the
Change filter!
display.
The filter is no longer effective when the
Change filter!
display appears, or at
the latest after 2 months. It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance).
Replacement filters can be obtained from
retailers (TCZ7003) or from customer
service (575491). If no new filter is used,
turn the
filter
setting to
No / Old
.
TES55236RU.indb 28
04.06.2013 14:35:44
Summary of Contents for TES55236
Page 3: ...A 9 11 12 13 14 15 16 17 1 2 3 10 4 5 6 7 8 TES55236RU indb 3 04 06 2013 14 35 33 ...
Page 4: ...D C B 19 18 20 8e 8a 8b 8c 8d 6a 6c 6d 6e 6b TES55236RU indb 4 04 06 2013 14 35 33 ...
Page 5: ...E 5b 5d 5c 5a TES55236RU indb 5 04 06 2013 14 35 34 ...
