16
Robert Bosch Hausgeräte GmbH
en
Preparation
This fully automatic espresso/coffee
machine grinds beans freshly for each
brew. If possible, use only beans for fully
automatic coffee and espresso machines.
Deepfreeze or store in a cool place in
sealed, airtight containers. Coffee beans
can be ground while frozen.
Tip:
Prewarm cups, especially small, thick
espresso cups, by placing on the cup shelf
16
or rinsing with hot water.
Using coffee beans
The appliance must be ready for use.
● Set the desired percup quantity using
dial
.
● Select the desired coffee strength using
button
5
.
● Place the prewarmed cup(s) under the
coffee outlet
10
.
● Press the coffee dispensing button
4
once for 1 cup or twice within three
seconds for 2 cups. The coffee is brewed
and dispensed into the cup(s).
Note
If you select two cups, the grinding and
brewing process is performed twice.
● Coffee dispensing stops automatically
when the selected quantity has been
dispensed.
i
The brewing process can be terminated
by pressing the coffee dispensing button
4
again. When coffee is brewed for
2 cups, it is dispensed via two outlet
nozzles (place the cups side by side).
Using ground espresso/
coffee powder
The appliance must be ready for use.
● Set the desired percup quantity using the
dial
.
● Place the prewarmed cup(s) under the
coffee outlet
10
.
●
Open the cover of the ground coffee duct
15
.
● Add
one to two
level scoops of ground
coffee (grind: mediumfine) to the ground
coffee duct
15
.
Note
Do not add whole beans or instant coffee!
Use a maximum of two level scoops of
coffee.
● Close the cover of the ground coffee duct
15
.
● Press the coffee dispensing button
4
.
i
Repeat the process if a second cup is
desired.
Note:
If coffee is not brewed within 90
seconds, the brewing chamber is emptied
automatically in order to prevent overfilling.
The appliance is rinsed.
Preparing hot water
The appliance must be ready for use. This
function allows water to be heated for a cup
of tea, for example.
!
Risk of burns
The foaming nozzle
9
gets very hot. Hold it
by the plastic part only.
Place an appropriate cup under the
foaming nozzle
9
.
Turn the rotary knob
9a
to the centre.
Turn the dial
8
to
g
/
h
.
!
Risk of scalding
When the dial is set to
g
/
h
the nozzle
may sputter a little. Do not touch the
foaming nozzle
9
or aim it at anyone.
Water runs into the cup.
End the process by turning the dial
8
back to
●
.
●
●
●
●
●
