23
en
The LEDs for button
h
and
H
“Add water”
light up.
●
Place one cleaning tablet in the duct
13
.
●
Fill the water tank with lukewarm water,
add descaling agent and dissolve com-
pletely (total liquid 0,5 litres)
or
pour prepared descaling mixture into the
water tank (total liquid 0,5 litres).
●
Press the steam button
h
. The descaling
process begins. Duration approx. 10 min-
utes. The descaling solution flows into the
water tray
18
.
The
J
LED lights up.
●
Place a suitable container (approx.
0,5 litres) under the nozzle
8
.
●
Set the dial
6
to
g
/
h
. The descaling
process begins. Duration approx. 5 min-
utes. The descaling solution flows into the
container.
The
I
LED lights up.
●
Empty and reinsert the grounds tray
17
.
The steam button LED
h
lights up.
●
Empty and clean the water tank
11
, fill
with fresh water up to the “max” mark and
reinsert.
●
Place a suitable container (approx.
0,5 litres) under the nozzle
8
.
●
Press the steam button
h
. The clean-
ing process begins. Water flows into the
container.
The
J
LED flashes.
●
Turn the dial
6
to “
O
”. The cleaning
process begins. Duration approx. 10 min-
utes. Liquid flows into the coffee grounds
tray
17
inside the appliance, then out
through the coffee outlet.
The
I
LED lights up.
●
Empty, clean and reinsert the trays
17
and
18
.
The appliance starts to heat up and is ready
for use once the LEDs for dispensing but-
tons
3
E
and
4
F
light up.
Important:
If the service programme is
interrupted, e.g. due to a power cut,
it is
vital
that the appliance be rinsed before it is
used again.
The appliance must be ready for use.
The
â
and steam button
h
LEDs flash.
●
Rinse the water tank
11
thoroughly and fill
with fresh water.
●
Press the steam button
h
. The appliance
is rinsed and liquid flows into the tray.
The
J
LED lights up.
●
Hold a cup under the nozzle
8
and turn
the dial
6
to
g
/
h
. Water runs into the
cup.
The
J
LED flashes.
●
Turn the dial
6
back to “
O
”.
The appliance rinses and is ready for use
again.
Anti-freeze
In order to avoid damage through cold
during transportation and storage, the appli-
ance must be emptied completely
first.
The appliance must be ready for use.
●
Remove, empty, and replace water tank.
●
Place a large, narrow container under
nozzle
8
.
●
Press
h
button.
●
As soon as the LED
J
lights up, turn the
rotary button
6
to
g
/
h
.
The appliance will release steam for a
while.
●
When nozzle
8
stops releasing steam,
turn dial back to “
O
”.
●
Turn off the appliance.
