28
Robert Bosch Hausgeräte GmbH
en
Descaling
!
Important:
– If you have very hard water, notice
an unusual amount of steam or if the
beverage size is not what it should
be, descale the machine before the
Q
LED comes on.
– Do not drink any of the liquids used for
descaling.
– Never use vinegar or vinegar-based
products.
– Never interrupt the descaling
programme.
Your TASSIMO machine must be descaled
regularly, because heating water creates
limescale which accumulates in the machine
over time. When descaling is needed, the
machine indicates this by activating the
“Descale required”
'
LED (3e). When this
LED lights up, you should descale your
machine immediately. Not doing so may
result in machine not functioning properly
and beverage quality deteriorating.
If you have not descaled the machine after
another 20 T DISCs, the indicator starts to
blink.
Specialdescalingagentscanbe
obtainedfromwww.tassimo.com(for
contactdetails,seepage36)orfromyour
retailer.
Runningthedescalingprogramme
1.
Take off the water tank.
2.
Remove the Service T DISC from the
compartment (6) at the back of the
machine.
3.
Fill the water tank up to the descaling
mark (0,5 l) and add the descaling agent
in accordance with the manufacturer’s
instructions.
¡
i
Note:
If you have hard water, increase the
amount of the descaling agent.
4.
Replace the water tank by slanting it
slightly and returning it to its original
position until it clicks into place.
1.
2.
3.
4.
06_TAS55_Korea.indb 28
02.05.2012 12:20:41
