36
Robert Bosch Hausgeräte GmbH
en
Problem
Possible!cause
Solution
O
Automatic mode
not working, appliance
remains in stand-by
mode.
Appliance is not switched on.
Make sure the appliance is
switched on before inserting a
T DISC.
No T DISC inserted.
Check if T DISC has been
inserted.
The barcode could not be
detected.
Clean the bar code reading
window and try again or
smooth the barcode on the
T DISC out with your thumb.
Use another T DISC.
If problems persist contact the
TASSIMO careline.
O
Automatic mode
skipped, appliance
goes straight to
N
Manual mode.
The barcode could not be
detected.
Clean the bar code reading
window.
Use another T DISC.
You can still prepare the drink
by holding down the start /stop
button.
The quality of
the crema has
deteriorated.
The drink outlet is clogged or
dirty.
Remove the drink outlet
from the brewing unit and
detach the piercing unit.
After cleaning everything
thoroughly, reassemble the
parts and replace them in the
brewing unit.
Brewing unit cannot be
securely closed.
Piercing unit / T DISC holder is
not properly inserted.
Insert the T DISC holder and
piercing unit properly.
The T DISC is not inserted
properly.
Re-insert the T DISC and
make sure it is properly
positioned.
The brewing unit is not
properly closed.
Push the clamp down firmly
until it audibly clicks into place.
Water dripping from
the brewing unit.
The T DISC is damaged or
leaky.
Stop the brewing process,
remove the T DISC and clean
the brewing unit.
The piercing unit is either
not inserted or not inserted
properly.
Check to ensure that the
piercing unit is inserted
properly.
More Customer Service information is available online at www.tassimo.com
