Bosch SSB120, Service Manual, Page: 14 / 48

6720866940 (2017/11) US SSB
14 | Control Panel (LCD Display)
Entering the “Time Zone Settings” menu it is possible to set the time zone
parameter as shown on the following figure:
Time Zone Settings
Time Zone Correction UTC +00.00
Daylight Savings Time Disabled
Fig. 29
To modify the visualization of the date and time value, entering in the
“Display Settings” menu it is possible to change the following features:
Display Settings
Time Notation 24h
Date Order DMY
Day Of Month 2Digits
Month 2Digits
Fig. 30
Display Settings
Year
4Digits
Date Separation Character “-”
Day Of Week Short Text
Seconds
No
Fig. 31
5 .3 Setting Central Heating CH and DHW setpoint
To change the Central Heating (CH) and DHW setpoint through menu
screen, press “menu” select use UP/DOWN “ / ” arrows to choose
the parameter and select by pressing the “OK”. Once selected, use the
right “ ” arrow key to highlight the temperature and use the UP/DOWN
arrow to change selected temperature . Press “OK” to confirm/save new
temperature .
Menu
Central Heating
Domestic Hot Water
Information
Settings
Fig. 32
Menu
Central Heating
Domestic Hot Water
Information
Settings
Fig. 33
CH and the DHW setpoint can be edit directly from the homepage of the
display.
When the text on the bottom left side is “CH Setpoint” press the right
“ ” button. The value shown in the bottom right side will be highlighted;
using the “UP/DOWN” keys it is possible to change the value. Once
assigned the desired value press the right “ ” button. The new value will
be stored.
To change the DHW setpoint press the “UP/DOWN” buttons. The text in
the bottom left side will change to “DHW Setpoint”. Now it is possible to
change the DHW setpoint using the same procedure which we described
before.
04:29 pm
70.0°F
DHW Setpoint
120.0°F
Fig. 34
a m
CH setpoint cannot be changed when outdoor reset function
is enabled. DWH setpoint can only be changed, when the
DHW function is enabled (see parameter #35 within Boiler
Settings).
5 .4 Boiler information
To access the main information about the boiler press “menu” button and
select “Information” using the “UP/DOWN” keys “ / ”.
Menu
Central Heating
Domestic Hot Water
Information
Settings
Fig. 35
Press “OK” and display will show:
Information
Software Versions
Boiler Status
Fig. 36