Bosch SRS2IKW04E, User Manua

Page: 33 / 56

Basic settings NL
B
Basic settings
asis settings
B
You can set up your device according to your needs.
asis settings
Overview of the basic settings
The basic settings depend on the equipment of your appliance.
Basic setting
Choise
Description
Water hardness
Scale with 4 positions
Set the water hardness.
→
"Setting water softening",
Page 22
Rinse aid dosage
Scale with 4 positions
Set or switch off the
amount of rinse aid.
→ "Amount of rinse aid
set del", page 24
Extra Dry
On
from
1
Switch Extra Dry on or off
for each cycle.
For improved drying results, the
temperature is increased during
the final rinse. The running time
may increase slightly.
Remark: Pay attention to
delicate items of crockery.
→ "Set extra dry",
Page 33
Factory setting
Put back Reset changed settings
to the factory state. Initial
commissioning settings
must be specified.
→
"Restore factory setting
ten", Page 34
1
Factory setting (may differ depending on the device type)
Set extra dry
4.
Just as often on
the LEDs indicate the desired
value.
press to
1.
on to press.
2.
To access the device settings,
press . for 3 seconds
If the "LED A" → Page 15 does
not light up, Extra Dry is switched
off.
If the "LED A" →
Page 15 lights up,
Extra Dry is switched on.
to press.
a flashes in the display
.
3.
Just as often on
until the display and
run.
to press
clipping
5.
To save the settings, press for
approx. 3 seconds.
33