Bosch SPS6ZMI35E Information For Use Download Page 47

Page: 47 / 56

Troubleshooting

Fault

Cause and troubleshooting

E:61-03 will light up
alternately. Water is
not drained.

Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.

Clean the wastewater pump.
→

"Clean wastewater pump", Page 51

Secure the cover of the wastewater pump so it
clicks into position.
→

"Clean wastewater pump", Page 51

E:92-40 will light up
alternately.

Filters are soiled or blocked.

▶

Clean the filters.
→

"Cleaning filters", Page 42

All LEDs lit up or
flashing.

Electronics have detected a fault.

Press the main switch button for approx.
4 seconds.
The appliance is reset and restarted.

If the problem occurs again:

‒

Switch off the appliance.

‒

Pull out the mains plug or switch off the fuse in
the fuse box.

‒

Wait at least 2 minutes.

‒

Switch on the fuse in the fuse box or insert the
mains plug.

‒

Switch the appliance on.

If the problem occurs again:

‒

Contact customer service.
→

"Customer Service", Page 52

Summary of Contents for SPS6ZMI35E

























































Search results

Summary of Contents for SPS6ZMI35E

Reviews:

Related manuals for SPS6ZMI35E

Brands by name

Popular brands

Bosch SPS6ZMI35E, Information For Use

Search results

Summary of Contents for SPS6ZMI35E

Reviews:

Related manuals for SPS6ZMI35E

Brands by name

Popular brands