operation
en
35
14.6 Activating button lock
The button lock prevents the appli-
ance from being operated accident-
ally or incorrectly while running.
▶
Press
for approx. 3 seconds.
a
The button lock is activated and
will be automatically deactivated at
the end of the programme.
a
The display shows "CL" when the
appliance is running.
a
The button lock remains activated
with a power failure.
14.7 Deactivate button lock
▶
Press
for approx. 3 seconds.
14.8 Interrupting programme
Note:
When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
1.
Press .
a
The programme is saved and the
appliance switches off.
2.
Press to resume the pro-
gramme.
14.9 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
▶
Press
for approx.
4 seconds.
a
All displays light up.
a
As soon as the displays are off,
the display shows "00h:01m" and
the residual water is pumped out.
a
The programme is cancelled and
ends after approx. 1 minute.
14.10 Switching off appliance
1.
Please note the information on
Safe use →
2.
Press .
Tip:
If you press during the wash
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
