Bosch SPE68U55UC, Operating Instructions Manual

Page: 17 / 52

15
Start the dishwasher
1
Press the [On/Off] button.
2
Select a cycle and desired options and press [Start/Resume] .
NOTE: Your dishwasher is protected against unintentional operation. If the dishwasher door remains open for more than 4
seconds after pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again
and close the dishwasher door.
Cancel a Cycle
1
Press and hold the [Start/Resume] button for approximately 3 seconds until the display reads “0:01” .
2
Wait about 1 minute while the dishwasher drains.
3
Press the [On/Off] button.
NOTE: Your dishwasher is protected against unintentional operation. If the dishwasher door remains open for more than 4
seconds after pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again
and close the dishwasher door.
Interrupt a Cycle
1
Press the [On/Off] button to turn the unit off.
2
To resume the cycle, press the [On/Off] button.
NOTE: Your dishwasher is protected against unintentional operation. If the dishwasher door remains open for more than 4
seconds after pressing the [Start/Resume] button, the operation will be paused. Press the [Start/Resume] button again
and close the dishwasher door.
Setting the Amount of Rinse Aid
The amount of rinse aid dispensed can be set from “r:00” to “r:06”.
To change the setting:
1
Press the [On/Off] button.
2
Hold down the “ A ” button (see page 14) and press [Start/Resume] until the display indicates “ H:00 ”.
3
Release both buttons.
4
Press the “ A ” button until the display shows “ r:04 ”.
5
Press the “ C ” button to select the desired setting.
“ r:00 ” = dispenser is OFF
“ r:01 ” = lowest setting
“ r:02 ” = low setting
“ r:03 ” = medium setting
“ r:04 ” = medium/high setting
“ r:05 ” = high setting
“ r:06 ” = highest setting
6
Press [Start/Resume] to save the setting.