Bosch Solution 880 CC408, Quick Reference Manual

Page: 6 / 24

CC408 | Quick Reference Guide | 2. Installer’s Programming Commands EN | 6
Bosch Security Systems | 6/04 | 4998152468B
Table 2: Codepad Indicators
Data
Value
Zone 1
Indicator
Zone 2
Indicator
Zone 3
Indicator
Zone 4
Indicator
Zone 5
Indicator
Zone 6
Indicator
Zone 7
Indicator
Zone 8
Indicator
MAINS
Indicator
0
1 X
2 X
3 X
4 X
5 X
6 X
7 X
8 X
9 X X
10 X
11 X X
12 X X
13 X X
14 X X
15 X X
1.4 Programming Option Bits
Use option bits to program any combination of the
four different options in the one location by
adding the options together. Programming a zero
disables all four options.
Example
If at LOCATION 177 you only want options 1, 2,
and 4, add the numbers together and the total is
the number to be programmed. For example, the
number to be programmed is 7 (1 + 2 + 4 = 7).
Table 3: Location 177 Programming Option
Bits
Option Description
1 Dialler reporting functions allowed.
2 Remote arming by telephone allowed.
4 Answering machine bypass only when
armed.
8 Use Bell 103 for FSK format
(disabled = CCITT V21).
2. Installer’s Programming
Commands
Installer’s programming commands are only used
in Installer’s Programming Mode. Enter the
command followed by the [#] key. Table 4 shows
the installer’s programming commands.
Table 4: Installer’s Programming
Commands
Command Description
958 Enable/disable zone status (hand-held
programmer required).
959 Test programming key.
960 Exit Installer’s Programming Mode.
961 Default system back to factory settings.
962 Copy panel memory to programming
key.
963 Copy programming key to panel
memory.
964 Erase programming key.
965 Default system for domestic dialling
format.
966 Enable/disable automatic stepping of
locations when programming.
999 Display software version (hand-held
programmer required).
2.1 Arming the System (On)
2.1.1 AWAY Mode
Press and hold the [#] key until two beeps sound.
Or
Enter your code followed by the [#] key
(for example, [2 5 8 0 #]).
2.1.2 STAY Mode 1
1. Press and hold the [*] key until two beeps
sound.
Or
2. Enter your code followed by the [*] key
(for example, [2 5 8 0 *]).