Bosch SMU8EDS01A User Manual Download Page 55

Page: 55 / 64

Troubleshooting

aus

Fault

Cause and troubleshooting

Rust spots on cutlery.

Cutlery may also rust if washed together with rusting
items.

▶

Do not wash rusting items.

Detergent residue is
present in the deter-
gent dispenser or the
tablet collecting tray.

Spray arms were blocked by tableware so detergent
was not rinsed out.

▶

Check that the spray arms are not blocked and can
rotate freely.

Detergent dispenser was damp when detergent was
added.

▶

Only add detergent to a detergent dispenser when
dry.

Excessive formation of
foam occurs.

Hand washing-up liquid is present in dispenser for
rinse aid.

▶

Immediately add rinse aid to the dispenser.
→

"Adding rinse aid", Page 28

Rinse aid has been spilled.

▶

Remove the rinse aid with a cloth.

Detergent or appliance care product used causes ex-
cessive foaming.

▶

Change the brand of detergent.

Fault

Cause and troubleshooting

Connection to home
network is not estab-
lished.

WLAN on router is not active.

▶

Check the wireless network connection of your
router.

WLAN display is flash-
ing.

Connection to home network is not available.

▶

Activate the wireless network connection on your
router.

Home Connect cannot
be implemented cor-
rectly.

Home Connect set incorrectly.

▶

Please consult the documents supplied for
Home Connect.

Technical fault is present.

▶

Please consult the information about support in the
documents supplied for Home Connect.

Fault

Cause and troubleshooting

Refill indicator for
rinse aid lights up.

Insufficient rinse aid.

Add Rinse aid →

Page 28

Set the amount of rinse aid to be dispensed.
→

"Setting the amount of rinse aid", Page 28

Summary of Contents for SMU8EDS01A

































































Search results

Summary of Contents for SMU8EDS01A

Reviews:

Related manuals for SMU8EDS01A

Brands by name

Popular brands

Bosch SMU8EDS01A, User Manual

Search results

Summary of Contents for SMU8EDS01A

Reviews:

Related manuals for SMU8EDS01A

Brands by name

Popular brands