aus
Troubleshooting
50
Fault
Cause and troubleshooting
Food remnants are
left on tableware in
the top basket.
Tableware in the top basket was placed too close to-
gether or top basket is overfilled.
▶
Arrange tableware in the top basket with sufficient
space in between. Position large items of tableware
at an angle, e.g. pans and ovenproof dishes.
‒
Activate the Extra Clean Zone function in the top
basket.
→
"Selecting Extra Clean Zone", Page 27
Remnants of food on
tableware.
Tableware is placed too close together or basket is
overfilled.
1.
Arrange tableware with sufficient space in between.
The spray jets must reach the surfaces of the table-
ware.
2.
Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked.
▶
Arrange tableware so that it does not obstruct
spray arm rotation.
Spray arm nozzles are blocked.
▶
Filters are soiled.
▶
Clean the filters.
→
Filters are inserted incorrectly and/or not engaged.
1.
Insert the filters properly.
→
2.
Engage the filters.
Washing programme selected too weak.
▶
Select a more intensive washing programme.
▶
Adjust the sensitivity of the sensors.
→
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food and do not
prerinse tableware.
▶
Adjust the sensitivity of the sensors.
→
Tall narrow receptacles in corner areas are not rinsed
adequately.
▶
Do not position tall narrow receptacles at too great
an angle or in corner areas.
Summary of Contents for SMS8ZDI01A
Page 63: ......