en
13
* depending on model
Additional options can be set with the
buttons
H
.
Express Wash/ Speed Perfect (VarioSpeed)
Ÿ
Express Wash/ Speed Perfect/
(VarioSpeed) *
This function can reduce the running time
by approx. 20% to 50% depending on the
selected rinse programme. To obtain
optimum cleaning and drying results at a
reduced running time, water and energy
consumption are increased.
·
Hygiene *
Hygiene
The temperature is increased during the
cleaning process. This increases the
hygiene status. This additional option is
ideal for cleaning e.g. chopping boards
and baby bottles.
¿
Extra drying *
Extra drying
An increased temperature during the final
rinse and an extended drying phase
ensure that even plastic parts dry better.
There is a slight increase in the energy
consumption.
Programme data
The programme data (consumption
values) can be found in the summary
of instructions. This data refers to normal
conditions and the water hardness set
value 2. Different influencing factors such
as water temperature or mains pressure
may result in deviations.
Aq
Aqua sensor *
* depending on model
The Aqua sensor is an optical measuring
device (light barrier) which measures the
turbidity of the rinsing water.
The Aqua sensor is used according to the
programme. If the Aqua sensor is active,
“clean” rinsing water can be transferred to
the next rinse bath and water consumption
can be reduced by 2–4 litres. If the
turbidity is greater, the water is drained
and is replaced with fresh water. In the
automatic programmes the temperature
and running time can also be adjusted to
the degree of soiling.
Switching on the appliance
–
Turn on the tap fully.
–
Close the door.
–
Switch on ON/OFF switch
(
.
The Cleaning display
)"
flashes.
–
Rotate programme selector
0
to the required programme.
–
Press START button
8
.
The Cleaning display
)"
is lit. The
programme starts running.
Timer programming
Timer programming *
* depending on model
You can delay the start of the programme
by 3, 6 or 9 hours.
–
Switch on ON/OFF switch
(
.
–
Keep pressing the Preselected starting
time button
@
until the appropriate
display 3h, 6h or 9h is lit.
–
Press START button
8
, timer
programming is activated.
Additional options
Washing the dishes